- Material: Composite Material
- Recommend Age: Maternity,12 y,18
- Tool Supplies: Assembled class
- Upgrade Parts/Accessories: Universal Joint
- RC Parts & Accs: Engines
- Use: Vehicles & Remote Control Toys
- Quantity: 1 pcs
- Technical parameters: KV1100
- Remote Control Peripherals/Devices: ESC
- For Vehicle Type: Cars
- Four-wheel Drive Attributes: Axle Bearing
- Wheelbase: Screws
Item No. SPG3870HV-180 70KG steering gear
Standard configuration: metal arm-gear stainless steel
Angle: The remote control defaults to 90 degrees, and the maximum can be adjusted to 120 degrees (depending on different brands, the maximum angle may have an error), the control board 0.5-2.5MS supports a maximum angle of 180 degrees.
Voltage and current: The supporting voltage of the servo is between 6V-8.4V, and the BEC is at least 3A or above.
The circuit has functions: the steering gear has soft start, jam protection (15s continuous load, current 2.5A or above), with lock (the remote control ignores, the control board control needs to send a command, even if the signal is disconnected, it will continue to execute, The steering gear has locking power; without a lock, the same command needs to be sent continuously, so that the steering gear can be firmly fixed in one position, and the disconnect signal means that the steering gear has no locking power).
Support range: 1:5 remote control car steering (the size of the steering gear is shown below), robots, robotic arms, etc.
The output tooth is 15 teeth
Single box weight: 231 grams
Dead band: 4μs
Motor: Core motor
Remote control Angle: 120°±2°
Voltage range: 6.0V-8.4V
Stall Torque(6.0V): 56 kg.cm
Stall Torque(7.4V): 70 kg.cm
Connector Wire Length: JR 260 mm